| |
RISC OS 4 Hardware & Software p152lems |
| |
(17:30 2/6/2000)
Matrix (14:00 6/6/2000)
Matrix (11:31 8/6/2000)
Matrix (15:13 12/6/2000)
jess (11:34 17/6/2000)
|
| |
|
Matrix |
Message #1358, posted at 17:30, 2/6/2000 |
| Unregistered user
|
Who have problems with RISC OS 4 like hardware compatibility or software compatibility write down and try togeter to find a solution... ok? :-) |
| |
 [ Log in to reply ] |
| |
|
Matrix |
Message #1359, posted at 14:00, 6/6/2000, in reply to message #1358 |
| Unregistered user
|
For all power-tec ULTRA DMA 32 Bit SCSI 1/2/3 Users (Probably you already know this message)
(UK) All versions of power-tec SCSI firmware (also the last 1.69) are NOT compatible with RISC OS 4 DMAManager so, for let the SCSI work correctly on RiscPC, you must insert the command SCSIDMAOff on your boot sequence (a good place is PreDesk file).
(IT) Tutte le versioni del firmware power-tec SCSI (compresa l'ultima, 1.69) NON sono compatibili con DMAManager di RISC OS 4 quindi, per far si che l'interfaccia SCSI funzioni correttamente, dovete inserire il comando SCSIDMAOff nella vostra sequenza di boot (un buon posto e' nel file PreDesk). :-) |
| |
[ Log in to reply ] |
| |
|
Matrix |
Message #1360, posted at 11:31, 8/6/2000, in reply to message #1359 |
| Unregistered user
|
There is another BUG in new power-tec 1.69 SCSI Drivers, New PowerMNG install a module called DOSMount that is not full compatible with RISC OS 4 DOSFS so it cause problems when a people try to read long files on floppy disc so insert in your boot sequence this line RMKill DOSMount (i insert it in my !!ROMPatch file) and all will work correctly :-) |
| |
[ Log in to reply ] |
| |
|
Matrix |
Message #1361, posted at 15:13, 12/6/2000, in reply to message #1360 |
| Unregistered user
|
Some peoples did ask me why if they try to format ZIP discs or SCSI discs in DOS format with PowerMNG they have problems... well I'M NOT SURE AT THE MOMENT but i think that is the OLD version of DOS FORMAT in PowerMNG IT NOT FUNCTION VERY GOOD, I SAW THAT IT FUNCTION GOOD WITH scsi hd LOW THAN 1.5 Gb and i have not ZIP for see what is the real problem... |
| |
[ Log in to reply ] |
| |
|
jess |
Message #1362, posted at 11:34, 17/6/2000, in reply to message #1361 |
| Unregistered user
|
Trying to print postscript through the parallel port hangs my RiscPC (600 u/g to sa233t). HP works, but not in the background. Anyone seen this? |
| |
[ Log in to reply ] |
| |
|
