| |
help with chatcube needed |
| |
HeathHayle (23:41 25/10/2020)
arawnsley (10:18 26/10/2020)
HeathHayle (10:56 26/10/2020)
arawnsley (13:38 27/10/2020)
HeathHayle (17:23 27/10/2020)
helpful (12:12 30/10/2020)
|
| |
|
David Heath |
Message #124972, posted by HeathHayle at 23:41, 25/10/2020 |
Member
Posts: 147
|
hi guys does anyone know if chatcube works on rpcemu if it does what verson of riscos do I need? thanks for your help |
| |
 [ Log in to reply ] |
| |
|
Andrew Rawnsley |
Message #124973, posted by arawnsley at 10:18, 26/10/2020, in reply to message #124972 |
R-Comp chap
Posts: 600
|
I believe it needs OS 5 due to requiring quite large amounts of RAM for a RISC OS program. I remember it had issues running on VRPC, for example.
OS5 + 128MB should be sufficient, so yes, it should probably work on RPCemu, but whether it also needs later ARM instruction support, I don't know. It didn't *seem* to when I last tried it, but as I say, I didn't get very far with that VRPC test - it ran out of RAM during login. |
| |
[ Log in to reply ] |
| |
|
David Heath |
Message #124974, posted by HeathHayle at 10:56, 26/10/2020, in reply to message #124973 |
Member
Posts: 147
|
thanks Andrew yes I actually managed to get it working by doing the same after trying other oses interestingly it didn't work on riscos 6.20 which I thought was strange so after that I just tried riscos 5 and it worked I was surprised because I would have thought it would have worked on riscos 6.20 |
| |
[ Log in to reply ] |
| |
|
Andrew Rawnsley |
Message #124978, posted by arawnsley at 13:38, 27/10/2020, in reply to message #124974 |
R-Comp chap
Posts: 600
|
6.20 isn't 32bit. To use >28 MB of RAM in wimpslot, you need RISC OS 5. That's what I meant by it needing a large amount of RAM for a RISC OS program. |
| |
[ Log in to reply ] |
| |
|
David Heath |
Message #124979, posted by HeathHayle at 17:23, 27/10/2020, in reply to message #124978 |
Member
Posts: 147
|
ah ok didn't know that thanks for the information |
| |
[ Log in to reply ] |
| |
|
Bryan Hogan |
Message #124980, posted by helpful at 12:12, 30/10/2020, in reply to message #124973 |
Member
Posts: 254
|
I think it also uses Unicode, so needs the RO5 font manager (it died with a font error when I tried it on RPCEmu with RO3.71). |
| |
[ Log in to reply ] |
| |
|
